Build a custom case for your gear.
This is going to take ten or fifteen minutes. There are a lot of options, so pick what feels right, and enjoy customizing your case.
Before you start, gather:
- The object you'd like a case for.
- A measuring tool - calipers if you have them, a steel ruler if not.
- Pencil and paper for jotting numbers as you go.
You can save and come back. Every change is auto-saved in your browser, and the Save Draft button up top stores a snapshot you can return to later.
Object Name and Shape.
Take a close look at your object. Find the manufacturer brand and specific model number.
For your reference. We'll show it on your order.
Most gear falls into one of two shape families - round or square. Pick the shape of your case which will have the most secure fit.
Not sure? Go with Rectangular — it works for most objects.
Measure your gear.
Measure the object from many angles to find the widest points. Measure at least twice! Use the exact numbers here and we'll add a fit tolerance later to get the final interior size.
Round up, never down. A 19.4 mm dimension goes in as 20 mm. Take measurements at the widest point in each axis. Every dimension must be at least 10 mm. Width and length are capped at 256 mm; height has no limit (we build tall cases in stacked sections). See the measuring guide for diagrams.
Fit is the gap we leave between your object and the inside walls of the case. Tighter feels precise but punishes a bad measurement; looser is forgiving but the object can shift. Not sure? Pick 1 mm.
Pick your wall thickness.
Thicker walls absorb more impact but take up more space and material. Thinner walls keep the case slim and light but will have less drop protection. Pick what feels best for how your case will be used. The price beside each option is for your object at that thickness.
Here is the final outside dimensions for your case.
Use your measuring tool to visualize it in your space.
Formula:
wall + object + fit + wall
Add a cutout.
A cutout is an opening in the wall of the case. Use one for cables, for a strap to thread, or for a port to stay accessible while the case is closed. Pick one, or skip if you don't need any.
Here's what you've designed!
Review and go back to edit if needed.