Everything you might want to know before placing an order. Still stuck? Drop us a line on the contact page.
Every case is made on an FDM printer to our customers' requirements. Some builds take longer than 24 hours to create.
Each case is made from a durable, flexible rubber material. The cases bend and stretch without cracking. They dampen vibration, absorb impacts, and hold up to years of hard use without getting brittle.
Our design has been refined over many iterations to ensure top quality and performance in extreme environments, keeping your gear safe from dust, water, scratches and impacts.
Yes. If a case is not right for you, mail it back within 30 days of delivery and we'll refund your order once it reaches us. Return postage is yours to cover.
Every case also carries a 60-day warranty against manufacturing defects (layer splitting, delamination, or a structural failure that use did not cause). If your case has a defect, contact us and we'll sort it out.
Getting your measurements right the first time is critically important. It prevents wasted material and time, and gets you using your case as soon as possible.
When in doubt, use measurements that are a bit larger than the object. A case that is slightly roomy is far better than one that's too tight. If you're unsure how to measure anything, contact us and we'll walk you through it.
If your case arrives and your object doesn't fit, reach out to our support team. We'll issue you a discount coupon toward a replacement order.
Yes. The Measuring Kit pairs plastic vernier calipers with a 3 meter retractable steel tape measure, the two tools our measuring guide recommends, for $12 with free shipping to US addresses. The calipers handle most gear, and the tape measure takes over for anything longer than the jaws.
Our cases are designed for everyday field use across a wide temperature range — roughly −20 °C (−4 °F) to +60 °C (140 °F) in normal conditions, with short exposures tolerable down to about −30 °C (−22 °F) or up to +80 °C (176 °F).
In hot environments like a sun-baked dashboard or closed car trunk, the padded infill wall acts as a heat buffer: it takes a long time for heat to reach the core, so brief warm-weather exposure won't compromise protection. Just avoid leaving the case in sustained high heat for hours, as the material can slowly deform under the weight of its contents.
In the cold, the case stiffens — the soft, energy-absorbing cushion you feel at room temperature becomes firmer and more shell-like. Your gear is still well protected from drops and impacts, but the feel changes from "cushioned" to "armored." This is normal and the case returns to its usual softness once it warms back up.
Our cases are very water resistant. No amount of rain or splashing will get into them, particularly when stored upright. That is equal to an IPX4 rating.
We've done immersion testing, too. High-pressure water can seep past the seal of the soft lid, but the chamber does not flood when exposed for short periods. If the item inside is itself protected from splashes, our cases will be suitable for a wet adventure.
Checkout ships to US addresses by USPS, and you pick the service before you pay. The price depends on whether your case weighs under a pound once it is packed:
You pay on Stripe's secure page, which takes your email and shipping address. For an address outside the USA, see the next answer.
Yes, by quote. Checkout takes payment for US addresses only, so an order from abroad starts the same way and finishes by email: pick International (outside the USA) as the shipping at checkout, add your name, email and country, and send it for a quote. We'll reply within 1 to 2 business days with the total, postage included, and how to pay. Nothing is charged until you accept it.
We currently ship to the following countries:
USA, Canada, Mexico, Costa Rica, Panama, United Kingdom, European Union member states, Australia, New Zealand, Japan, South Korea, Singapore, Switzerland, Norway, and South Africa.
A few things to know before you order:
Shipping costs. International shipping is significantly more expensive than domestic US shipping. Depending on destination and service level, expect $25 to $80 for a small package, and your quote gives the exact figure.
Import taxes and duties. Your country's VAT, GST, or import duties are not included in our prices or shipping charges. These are collected by your local customs authority or the delivery carrier when your package arrives, and they're your responsibility as the importer. Rates vary by country (for example, UK VAT is 20%, EU VAT ranges from 17% to 27%, Canadian GST/HST is 5% to 15%, and Australian GST is 10%).
Delivery times. Delivery time depends on where you live and on how long customs holds the package.
Refused packages. If you refuse delivery due to import fees, we cannot refund original shipping costs, and any return shipping charges will be deducted from your refund.
Don't see your country listed? Contact us and we may be able to accommodate the request.
Pick a standard size and we make it to order, or measure your gear for a case built to its exact shape.
Not sure which way to go? Talk to us.