This binoculars case seals out dust and rain and puts a 10mm wall on every side of the optics, built to the exact dimensions of one pair of Fujinon HC 10x42 binoculars. It is a real case for a pair you carry into the field, made to take the knocks of a pack, a tailgate or a wet rock.
We built this binoculars case for a pair of Fujinon HC 10x42 binoculars used for travel and birdwatching. Like most binoculars, they came with a thin soft pouch, which keeps the pair and its lens caps together in a drawer and leaves the optics open to grit, rain and the next hard surface they meet. We wanted a case that protects them properly, so we started from the exact outline of the binoculars and built the walls outward from there.
The lid closes over the rim of the body and seals the binoculars case, so dust from a gravel road and rain from a passing shower stay outside while the binoculars sit dry within. The parts that matter most are the ones you look through, and with the objectives and eyepieces sealed away from grit, a morning of birdwatching starts with clean glass.
Every wall of the binoculars case is 10mm thick, which puts a full centimeter between your binoculars and a tailgate, a wet rock or the rest of the gear in a pack. The cavity is sized to the exact dimensions of this pair, so the binoculars sit firmly in place inside the case through a day on the trail and a drive home on a rough road.
Two slots in the lid take the binoculars' own neck strap. When you lift the binoculars out for a quick look at something on the far bank, the lid stays with them on the strap, ready to go back on as soon as you lower them.
The binoculars case is built for the trail, the shoreline and every drive between them, with a seal and 10mm walls that keep your optics ready for the next bird.
Pick a standard size and we make it to order, or measure your gear for a case built to its exact shape.
Not sure which way to go? Talk to us.