Pancake lens case

A pocket-sized camera lens case for the Sony Zeiss 35mm f/2.8.

The Zeiss Sonnar T* FE 35mm f/2.8 ZA weighs 120 grams, light enough that it nearly disappears on a camera body. Its case has 5mm walls, fits in a jacket pocket, and holds the front cap in a seat on the bottom so the cap travels with the lens.

Sony Zeiss 35mm f/2.8 lens case, closed, in a three-quarter view
The lens is seated and the case is closed, slim enough to ride in a jacket pocket.

A 120g pancake lens is the one you bring on days you'd otherwise leave the camera at home, like the walk to the coffee shop or a trip where every gram in the bag has to justify itself. We kept this Sony 35mm f/2.8 lens case small for the same reason.

Five-millimeter walls

Front of the Sony 35mm f/2.8 lens case with the lens seated inside
Seen from the front, the cavity follows the outline of the lens.

The cavity is shaped to the outline of the lens and the walls are a uniform 5mm, so the case lies flat in a jacket pocket and keeps a low profile under the fabric.

Five millimeters is the thinnest wall in this gallery, chosen for a lens that spends its time in pockets. It handles everyday knocks, such as keys in the same pocket, the corner of a desk or a set-down on a stone bench, and it keeps the painted barrel and the focus ring free of scuffs. If your lens will face harder drops, you can choose a thicker wall when you design your own case.

The cap rides on the bottom

Front cap stored in the recessed seat on the bottom of the Sony 35mm lens case
The front cap clips into a recessed seat on the underside of the case.

The front cap is the easiest part of a small lens to lose, since it gets pulled off in a hurry and then set down on a table or dropped into the wrong pocket. The bottom of this case has a recessed seat sized to the cap, so the cap stays with the case.

Side view of the Sony 35mm lens case showing the cap seat
From the side, the cap sits flush with the bottom, so the case still lies flat in a pocket.

When you take the lens out to shoot, you pull the cap off, mount the lens and press the cap into the seat on the bottom. At the end of the day you reverse the order, and the cap is where you left it.

Sony 35mm lens with its cap on, seated in the case
With the cap on, the lens seated and the lid closed, the case is ready to travel.

The Sony 35mm f/2.8 lens case keeps the lens and its cap together in one jacket pocket, which is where a 120g pancake was meant to ride.