The Sigma 50mm f/2 DG DN Contemporary is a compact full-frame prime, the kind of lens that stays on the camera for most of a day. We made its case hexagonal because flat faces are easier to hold and stay put on a table, and because the corners are where a dropped case lands, so that's where we put the extra material.
We started this Sigma 50mm lens case from the exact outline of the lens and built outward. It is made as a lid and a body, with a cushioning pattern built inside the walls that compresses under impact and takes the load before it reaches the lens.
Pick up the case and your fingers land on flat faces, with an edge between each pair to register against. Set it down and it stays where you put it, because a flat face resting on a flat surface has nothing to roll on. In a bag, the faces pack against the rest of your gear and leave less wasted space than a round case would.
The walls are 10mm thick on every face and 15mm at each corner. A case that lands hard usually lands on a corner, whether that's the edge of a counter, the lip of a step or the frame of a backpack, and the extra material at the corners absorbs that load before it reaches the lens.
A recessed seat on the bottom face holds the front cap the same way the front of the lens does, and the cap stays put while the bag gets jostled. Pull the cap, press it into the seat and mount the lens. When the lens comes off the camera at the end of the day, the cap is waiting at the base of the case.
The Sigma 50mm f/2 lens case is built for a lens you want with you every day. It packs tighter in a bag than a round case, and the lid seats snugly over the body to keep dust and dirt away from the glass.
Pick a standard size and we make it to order, or measure your gear for a case built to its exact shape.
Not sure which way to go? Talk to us.